Sterile sample bottles for Legionella testing on a yacht
Knowledge Centre · Legionella

Legionella Testing on a Yacht: What ISO 11731 Means in Plain Words

A Legionella result depends on how the sample is taken and how the laboratory counts it. Here is what the standard says and what the health bodies add.

At a glance

Four points from the standard and the health bodies

From the ISO catalogue page, the US CDC and the 2017 European technical guidelines on Legionella.

7–14 days
Time for a culture result, per the CDC
2–48 hours
Time for a PCR result, per the CDC
250 mL
CDC standard routine sample volume
ISO 17025
Accreditation standard the CDC cites for laboratories

Not sure how your last Legionella result was taken?

Send us the report. We will tell you what it shows and what is missing.

Parts to check

How a sample is taken

In an outbreak investigation setting, the CDC’s sampling procedure gives details you can also use as a model:

  • Take a 1 litre bulk sample from the tap in a sterile bottle.
  • Add sodium thiosulfate to neutralize any disinfectant in the water.
  • Swab biofilm where needed and keep samples cool in a cooler with ice packs.
  • Sample places such as showers, taps and hot water heaters.

Samples should represent the whole system, not only one tap. Our Legionella testing service plans the points with the crew.

Water sample taken from a yacht tap for Legionella testing
Francesco Colombo, CEO of AirBio Marine (Ekonore S.r.l.)
A word from our CEO

A positive result is not a verdict on the crew. It is information. What matters is that the samples were taken well, and that someone acts on what they show.

Francesco Colombo

CEO · AirBio Marine, a division of AirBio (Ekonore S.r.l.)

Book Legionella testing
What our clients say

Verified reviews on Trustpilot

What it covers

What we do

We plan sample points on the hot and cold system, take sterile samples and send them to an accredited laboratory that follows ISO 11731. You receive the results with the sample points, temperatures and dates, so the next test can be compared.

If a result is positive, see our guide on what to do after a positive result.

Calorifier and hot water lines on a yacht
Our method

How we test a yacht for Legionella, step by step

Five steps, agreed with the crew.

Plan the points

Calorifier, return, far outlets and showers are chosen with the crew.

Read temperatures

Temperatures are measured at each point and written down.

Sample

Sterile bottles are filled and neutralized where disinfectant is present.

Send

Samples go to an accredited laboratory the same day.

Report

Results are read with the crew and filed with the readings.

Francesco Colombo, CEO of AirBio Marine (Ekonore S.r.l.)
Our approach

We would rather explain a result in a sentence than hand over a page of numbers nobody can use.

Francesco Colombo

CEO · AirBio Marine, a division of AirBio (Ekonore S.r.l.)

Speak to our team

Ready to test for Legionella?

Sampling, laboratory analysis and a clear report, at the berth.

What our clients say

Verified reviews on Trustpilot

Onboard survey request

Tell us about the yacht

Yacht length, marina, systems and what you have noticed on board. A technician reads the message and calls you back to plan the survey.

"*" indicates required fields

Name*

Prefer to talk?

+39 0584 433 198

Monday to Friday. For captains, engineers and managers.

Where we work

Italian Riviera and Tuscany marinas and yards — Viareggio, La Spezia, Portofino, Genoa, Sanremo, Livorno, Argentario — and other Mediterranean ports on request.

Documented work

Every job ends with a technical report and photos for the yacht's records.