Hand print in window condensation
Knowledge Centre · Air and mould

Condensation on a Yacht: Why Cabins Sweat and How to Stop It

Water on a port light or a cold panel is a sign that warm, damp air is meeting a cold surface. The US EPA gives a humidity target and four ways to cut it. None of its pages is written for boats, so we say where that matters.

Scientific review by Linda Abenaim, Biologist ·

At a glance

The EPA numbers and steps

From EPA guidance written for homes and buildings.

60%
Relative humidity above this is likely to result in condensation
30–50%
The ideal indoor humidity range
Dry fast
Wipe wet surfaces quickly
Insulate
Cold surfaces such as cold water pipes

Tired of wiping the port lights?

Tell us where the water shows up. We will suggest what to check.

Linda Abenaim, Biologist at Ekonore / AirBioBiologist
The science behind it

Linda Abenaim, Biologist at Ekonore / AirBio

Humidity is the number I ask crews to watch. When relative humidity stays above roughly 60 to 70 percent for long periods, surfaces stay damp enough for mould to settle. A simple hygrometer in each cabin tells you more than any smell.

Linda Abenaim · Biologist, Ekonore / AirBio

Place a hygrometer in the worst cabin and check it morning and evening for a week. The readings show when and where the problem builds up.

  • Humiditykeep it below the danger zone
  • Morningwhen condensation peaks
  • Airflowvents and doors open
Linda Abenaim on LinkedIn
Parts to check

Where to look on a yacht

Port lights and hull sides. Wet or dripping in the morning?

Cold water pipes. Are they insulated, or do they sweat and drip?

Behind panels and in lockers. Dark spots or a musty smell. See the mould guide.

Shut-up cabins. Air that does not move builds up moisture. See our back-in-service checklist.

Fan coil trays and drains. Standing water adds moisture. See fan coil drain trays.

White bedding on a bed
Francesco Colombo, CEO of AirBio Marine (Ekonore S.r.l.)
A word from our CEO

Wiping the window helps for an hour. Finding where the moisture comes from is what actually fixes it.

Francesco Colombo

CEO · AirBio Marine, a division of AirBio (Ekonore S.r.l.)

Ask about a moisture check
What our clients say

Verified reviews on Trustpilot

Reviews of La BioDisinfestazione | Ekonore Italia, the group AirBio Marine belongs to.

What it covers

What we do

We look for where the moisture is coming from and where it is settling, clean and sanitize surfaces that have been damp, and tell you what we would change. Where mould has started, we can remove it and photograph the result.

See our yacht condensation page and our mould remediation service.

Window with wooden shutters
Our method

How we deal with condensation, step by step

Five steps, planned with the crew.

Inspect

We look at surfaces, pipes, lockers and vents.

Measure

We note humidity and where water collects.

Clean

We clean and sanitize surfaces that have been damp.

Advise

We suggest what to change: insulation, ventilation, habits.

Report

You receive photos and a written summary.

Francesco Colombo, CEO of AirBio Marine (Ekonore S.r.l.)
Our approach

We photograph the damp spots before and after, and tell you plainly what we would change.

Francesco Colombo

CEO · AirBio Marine, a division of AirBio (Ekonore S.r.l.)

Speak to our team

Ready to find the moisture source?

Inspection, cleaning where needed, and a photo report, at the berth.

What our clients say

Verified reviews on Trustpilot

Reviews of La BioDisinfestazione | Ekonore Italia, the group AirBio Marine belongs to.

Onboard survey request

Tell us about the yacht

Yacht length, marina, systems and what you have noticed on board. A technician reads the message and calls you back to plan the survey.

"*" indicates required fields

Name*

Prefer to talk?

+39 0584 433 198

Monday to Friday. For captains, engineers and managers.

Where we work

Italian Riviera and Tuscany marinas and yards — Viareggio, La Spezia, Portofino, Genoa, Sanremo, Livorno, Argentario — and other Mediterranean ports on request.

Documented work

Every job ends with a technical report and photos for the yacht's records.