Labelled sample containers and test tubes on a water analysis laboratory bench
Drinking water

What each yacht water test result means, in plain words

E. coli, plate counts, Pseudomonas: what the lab lines mean, and what to do when one is not clean.

At a glance

The key points from the WHO guide

From the water chapter of the Guide to Ship Sanitation.

0 in 100 ml
E. coli and faecal coliforms: the target in the guide
HPC
Shows the general state of the water system
Aerators
Can hold Pseudomonas aeruginosa
Farthest tap
Check the disinfectant level there too

Want a water report reviewed?

Send us the results. We will tell you what we would check.

Parts to check

If E. coli is found

If the lab finds E. coli or faecal coliforms, treat the water as unsafe to drink until you have a clean result.

  • Stop drinking and cooking with the water, and tell the crew and guests.
  • Check the disinfectant level at the tap and at the farthest tap.
  • Look for a cause: a recent fill in a new port, an open tank hatch, a repair, a backflow.
  • Clean and disinfect, then take a new sample.

These steps are our practical advice. The WHO guide sets the target; it is not a step-by-step recipe for your yacht.

Equipment showing test results
Francesco Colombo, CEO of AirBio Marine (Ekonore S.r.l.)
A word from our CEO

A number on a report is a question, not an answer. Find out where it comes from before you treat it.

Francesco Colombo

CEO · AirBio Marine, a division of AirBio (Ekonore S.r.l.)

Book a water result review
What our clients say

Verified reviews on Trustpilot

What it covers

Plate counts and Pseudomonas

A high plate count or Pseudomonas result usually points to the water system itself: old tank sediment, biofilm in pipes, dirty aerators, or hot water that is too cool.

Read more in our guides on why biofilm comes back and tank inspection. Take samples at the same points each time, so results can be compared.

Chemists working together in a laboratory
Our method

What we do after a bad water result, step by step

Five steps. We only report what we can see and measure.

Read the report with you

We go through each line and the limit used by your lab.

Find where it starts

We check the tank, the pipes, the taps and the aerators.

Clean and disinfect

We treat the parts that need it, following your water plan.

Take new samples

We sample the same points again.

Report

You get the results and photos to keep in the ship file.

Francesco Colombo, CEO of AirBio Marine (Ekonore S.r.l.)
Our approach

Take samples at the same taps each time. Then you can see if things are getting better or worse.

Francesco Colombo

CEO · AirBio Marine, a division of AirBio (Ekonore S.r.l.)

Speak to our team

Ready to check your water system?

Inspection, sampling and a clear report, at the berth.

What our clients say

Verified reviews on Trustpilot

Onboard survey request

Tell us about the yacht

Yacht length, marina, systems and what you have noticed on board. A technician reads the message and calls you back to plan the survey.

"*" indicates required fields

Name*

Prefer to talk?

+39 0584 433 198

Monday to Friday. For captains, engineers and managers.

Where we work

Italian Riviera and Tuscany marinas and yards — Viareggio, La Spezia, Portofino, Genoa, Sanremo, Livorno, Argentario — and other Mediterranean ports on request.

Documented work

Every job ends with a technical report and photos for the yacht's records.