
What Our Technical Report Contains
Every AirBio Marine job ends with a written report the captain can file in the yacht’s technical history.
This page shows the structure of the end-of-job report AirBio uses ashore and on board, section by section, with a real results table from one of our jobs.
Eight parts, always in the same order
The same structure is used for every job, so reports from different years and different systems can be compared side by side.
Header
Client, location, date of the work, who carried it out and who is responsible for the job.
1. Subject
Which systems were treated: air handling units, ducts, fan coils, tanks, pipework, calorifier, galley extraction.
2. Method
How the work was done, step by step, with the products used and their safety data sheets.
3. Purpose and benefits
Why the work was needed and what it changes for the people on board.
4. Outcome
What was found and what was achieved: photos before and after, readings, and swab or laboratory results when taken.
5. Reference standards
The standards and procedures the work follows, such as ISO 9001, ISO 14001, ISO 45001 and UNI EN 16636.
6. Certifications
The certifications and qualifications of the company and of the technicians.
7. Conclusions
Advice for maintenance and the date of the next check, signed by the person responsible.
What a results table looks like
Section 4 of the report for a job AirBio carried out at a medical centre, with surface swabs taken before and after.
| Sampling point | Parameter | Before | After | Reduction |
|---|---|---|---|---|
| Front office | Microorganisms (per 100 cm²) | over 300,000 | under 40 | over 99.98% |
| Front office | Yeasts and moulds (per 100 cm²) | over 1,500,000 | under 50 | over 99.99% |
| Radiology plenum | Microorganisms (per 100 cm²) | 3,200 | 70 | 97.8% |
Values from the medical centre case study, a job carried out ashore by AirBio.


How the report is adapted for a yacht
- Vessel and berth instead of building and address. The yacht name can be left out if the owner prefers.
- Systems listed the way the crew knows them: deck by deck, cabin by cabin, tank by tank.
- Readings at representative outlets, temperatures at the calorifier and photos for each cabin unit.
- The next check date planned around the charter season and the next yard period.
- A copy in English for the captain and the management company.
Questions about the report
Is the report included in every job?
Yes. Every job ends with a written technical report, with photos and the results of any readings or samples taken.
Can the report be used for a class or flag inspection?
It documents what was done, when and how, and can be shown to inspectors as part of the yacht’s maintenance records. It does not replace any certificate issued by class or flag.
Are laboratory results included?
When samples are taken, the laboratory results are attached and summarised in the outcome section.
Who signs the report?
The report is issued by AirBio and signed by the person responsible for the job.
See it in practice
Each case study below was documented with this report structure.
Water system and fan coils on a motor yacht
Water and air treated during the same yard stop.
Supply ducts and insulation at an industrial plant
Swabs taken on two dates, with the reduction measured.
The services behind this job

Motor yacht: water system and fan coils
Water and air treated during the same yard stop.

Medical centre: AHU, ducts and fan coils
Swabs before and after: over 99.9% fewer microorganisms.

Diagnostic centre: fan coils and splits
Mould on panels and deposits in the condensate trays.

Professional kitchen: hoods, ducts and fan
A blocked extraction system brought back to work.
Water and air in the same stop?
Tell us the yacht, what the crew has noticed and where she is now: a technician calls you back within 24 hours and plans both sides around your programme.
Tell us about the yacht
Yacht length, marina, systems and what you have noticed on board. A technician reads the message and calls you back to plan the survey.
"*" indicates required fields
Where we work
Italian Riviera and Tuscany marinas and yards — Viareggio, La Spezia, Portofino, Genoa, Sanremo, Livorno, Argentario — and other Mediterranean ports on request.
Documented work
Every job ends with a technical report and photos for the yacht's records.
