Yachts and superyachts in the harbour of Livorno
Italy

Yacht Sanitization in Livorno

A short run down the coast from our base, in a working commercial port.

Livorno mixes commercial traffic with yacht berths and refit sheds, which makes it a practical stop: there is space, there is crane capacity, and a yacht can sit alongside without the seasonal pressure of a resort marina.

A short run from our basePlanned around your programmeDiscreet, alongside, no yard move
The port

Space and quay access, which suits the way we work

Almost everything we do happens on the quay, not on board. Livorno gives us the room for it.

The treatment units stay ashore and connect to the yacht with hoses; only a small dosing unit comes aboard, on covered decks. In a tight resort berth that is a negotiation with the marina. In Livorno it usually is not.

For the air side, a commercial quay means a van can get close, which matters when the job involves opening duct runs and carrying filters and panels off the yacht rather than stacking them in a passageway.

It also means work can start early and run through the day without the noise and access restrictions that come with a marina full of guests.

Port detail: The Port of Livorno is a multipurpose port classified as Core in the European TEN-T network and is largely inside the coastline, well protected from southerly and westerly winds, according to the port authority.

Seagulls over Livorno harbour
Know the port

Livorno at a glance for captains and crews

Where yachts berth, where they go for refit and what the local calendar looks like, and what that means for the air and water systems on board.

Marinas and berths

  • Marina Livorno (D-Marin with Azimut|Benetti) is planned to have 815 berths in total.
  • Its superyacht area is centred on the Mediceo Pontoon beside the Fortezza Vecchia, for yachts up to 80 m.

Yards and local calendar

  • Benetti's Livorno shipyard, the former Orlando yard, has a covered area of 30,000 m².
  • The first phase of the Marina Livorno superyacht marina is scheduled for completion by the end of 2026.

What it means on board

  • With a new superyacht marina opening, more yachts will stop here between Tuscany and the islands: a quick water check on arrival is a sensible routine.
  • Refit periods at the local yard are a good time to clean galley extraction and air ducts properly.

Coverage Our Tuscan team works in Livorno and along the nearby coast. Wherever your yacht is, we also travel on request: book an onboard survey.

Port facts checked against public sources in October 2026. Berth numbers and limits change, so always confirm with the marina. Sources: superyachtnews.com, yachtcharterfleet.com, en.wikipedia.org.

Certified processes
  • ISO 9001
  • ISO 14001
  • ISO 45001
  • ISO 16636
A.I.I.S.A. member · NADCA ASCS certified
What we do

Everything we can treat while you are in Livorno

The same six jobs make up almost every visit. On most yachts more than one of them is needed at the same time, which is why we survey first and then plan them into a single stop.

Yacht services in Livorno: Yacht galley hood cleaning in Livorno · Yacht galley extraction duct degreasing in Livorno · Yacht air duct cleaning in Livorno · Yacht fan coil cleaning in Livorno · Yacht Legionella testing in Livorno · Yacht fresh-water system sanitization in Livorno · Yacht water tank cleaning in Livorno · Yacht interior sanitization in Livorno · Yacht odour removal in Livorno.

See the full list of services if you are looking for something more specific, such as water sampling, post-refit or charter turnaround work.

Canal in Livorno
Timing

Good for a stop between legs

Livorno is often a staging port rather than a destination — a few days between one leg and the next. That is enough for most of what we do.

A water system treatment and the sampling that goes with it fits into a short alongside period. What takes longer is the laboratory turnaround, so the sample should be taken at the start of the stop, not the end.

If the galley extraction is the problem, that is a job that can be done in a single stop without the yacht going anywhere.

How a visit works

From the first call to the report

The sequence is the same whichever berth you are on in Livorno. What changes is the timing, and that is planned around the yacht rather than around us.

We look before we quote

A technician goes through the yacht with the crew: which outlets are used daily and which almost never, where the air handling units sit, what the crew has actually noticed.

The visit is planned around you

We fit the work into the window you have — between charters, during a yard period, or over a quiet weekend alongside.

We work alongside

No yard move and no lift. The heavy equipment stays on the quay; only hoses and a small dosing unit come aboard, on protected decks.

You get it in writing

Sampling points, what was done, and the laboratory report where water was analysed. That document is what closes the job.

Francesco Colombo, CEO of AirBio Marine (Ekonore S.r.l.)
A word from our CEO

Livorno is a working port as much as a yachting one. Our Tuscan technicians know how to move equipment through it quickly, so the time on board goes into the work, not into logistics.

Francesco Colombo

CEO · AirBio Marine, a division of AirBio (Ekonore S.r.l.)

Book a survey at this port
The AirBio Marine technical team standing with the service van and equipment on the quay of a Mediterranean marina
The same technicians who come on board, with their own equipment and service van.
Our people

Our own technicians, certified processes

Every intervention is carried out by AirBio technicians employed and trained in house, never subcontracted. We work under certified management systems and close each job with a technical report the captain can file on board.

  • ISO 9001Quality
  • ISO 14001Environment
  • ISO 45001Health & safety
  • ISO 16636Pest management
What our clients say

Verified reviews on Trustpilot

Reviews of La BioDisinfestazione | Ekonore Italia, the group AirBio Marine belongs to.

Our work on board

What a visit looks like

A few moments from the jobs we do on yachts every season: the equipment on the quay, the systems we open and the checks we close with. The same way of working applies in Livorno.

Yacht sanitization intervention in progress with equipment on the pontoon, Riviera marina
Water system sanitizationOnboard intervention in a Mediterranean port.
AirBio Marine technician setting the water sanitization unit on the protected teak aft deck
Pre-season interventionComplete system preparation.
Marine fan coil unit with coil, valve and pipes visible during an AirBio Marine inspection
Fan coil cleaningDeep cleaning for optimal air quality.
Deck jacuzzi on a yacht with a digital meter measuring the water after treatment
Legionella monitoringRisk assessment and water measurements.
AirBio Marine treatment units on the quay beside a motor yacht during a fresh-water system sanitization
Units stay on the quayOnly hoses and a small dosing unit come aboard.
Nearby

Other ports on the same run

If the yacht moves before we get to you, or you are berthed one harbour along, these are the pages for the ports next door.

The complete list is on the ports page.

FAQ

Working in Livorno: frequently asked questions

Do you need the yacht lifted?

No. Everything we do is done afloat, alongside. A lift is only useful if the yard has one planned for other reasons.

How much space do you need on the quay?

Room for two wheeled units and the hoses — roughly a van’s worth. We check it during the survey so there are no surprises on the day.

Can you come at short notice between charters?

Often yes, because Livorno is close to us. Tell us the window and we will say straight away whether it fits.

What does yacht sanitization in Livorno include?

Yacht sanitization in Livorno covers the three systems that matter most on board: the air conditioning and ducts, the fresh-water system and the galley extraction. We inspect, clean and sanitize alongside, then send a photo report. See air conditioning sanitization, water system sanitization and galley hood cleaning.

Do you work on yachts alongside in Livorno?

Yes. The work is done alongside, with no yard move, and planned around your programme. We reach Livorno on request.

Can you take water samples for Legionella on a yacht in Livorno?

We can take water samples on board. See our Legionella testing service and the guide to Legionella on yachts.

How do I book yacht sanitization in Livorno?

Use the onboard survey form on this page or call +39 0584 433 198. Tell us the yacht, the berth in Livorno and your dates, and we will propose a plan.

Useful references: AdSP Mar Tirreno Settentrionale · WHO Guide to Ship Sanitation · Yacht drinking water testing guide · Yacht hygiene: law, guideline or good practice · Our method

Onboard survey

Stopping in Livorno?

Tell us the yacht, the berth and how many days you have alongside. A technician calls you back within 24 hours.

Onboard survey request

Tell us about the yacht

Yacht length, marina, systems and what you have noticed on board. A technician reads the message and calls you back to plan the survey.

"*" indicates required fields

Name*

Prefer to talk?

+39 0584 433 198

Monday to Friday. For captains, engineers and managers.

Where we work

Italian Riviera and Tuscany marinas and yards — Viareggio, La Spezia, Portofino, Genoa, Sanremo, Livorno, Argentario — and other Mediterranean ports on request.

Documented work

Every job ends with a technical report and photos for the yacht's records.