Fresh water running from a chrome tap
Water systems

Yacht Pipe Cleaning: Fresh-Water Pipes and Distribution System Sanitization

We disinfect the whole fresh-water network, from tanks and calorifier to lines and outlets, then flush it back to normal use.

Yacht pipe cleaning for yachts where cleaning the tank alone is not enough. We sanitize the pipes, distribution loops, calorifiers and outlets in guest cabins and crew areas with high-concentration ozonated water, flushing outlet by outlet and measuring the result.

Italy · Monaco · SpainAt-berth serviceTechnical reportsDiscreet & professionalA healthier
yacht experience

Yacht water system sanitization at a glance

Yacht pipe cleaning, or water system sanitization, is the disinfection of the whole fresh-water network, from tanks and calorifier to pipes and outlets, followed by flushing back to normal use.

What we treat
Fresh-water tanks, the calorifier, distribution loops, pipes, and outlets in guest cabins and crew areas, including shower heads and fittings.
Who it is for
Yachts where cleaning the tank alone is not enough: after a lay-up or a long quiet period, when the whole network has been stagnant, or after a positive Legionella result.
How it works
We map the network first, then run high-concentration ozonated water through the system, flushing outlet by outlet and measuring the result.
How long it takes
From less than a day to a day or more, depending on the size of the yacht and the type of work. We confirm the timing after the survey.
How often
We recommend repeating it at least every six months.
Crew and guests
They can stay on board during the work. It is better to go back into the treated spaces once the treatment has finished. Water outlets are out of use while the system is treated and flushed.
Cost
We can give you a rough quote before the survey. The precise quote follows the onboard survey, once we have seen the yacht and the areas to treat.
Where
On board, at berth, in Italy, Monaco and Spain. The work is done by AirBio Marine's own technicians.
What you receive
A technical report with the circuits and outlets treated, the method used, weak points such as dead legs and low-use branches, photos and readings.
How to start
Tell us the yacht, what the crew has noticed and where she is now. A technician calls you back within 24 hours and plans an onboard survey around your programme.
Is this your yacht?

When the problem is in the pipes, not only the tank

Many crews clean the tanks and still find the same complaints a few weeks later. These are the situations that point to the distribution network.

The tank was cleaned but the smell came back

If the tank is clean and the smell returns, the cause may be biofilm in the pipes, calorifier or outlets downstream.

One cabin smells worse than the others

A problem limited to one shower or basin can be associated with a low-use branch or a local dead leg.

Guest cabins unused for weeks

Showers and taps that nobody opens let water stand still in the last metres of pipe.

Lukewarm water in the hot circuit

Hot water that is not really hot, or cold water that warms up in the lines, can favour bacterial growth.

First water from the tap is cloudy

Cloudy or discoloured water that clears after a few seconds may indicate deposits in the line serving that outlet.

After lay-up or a long quiet period

Seasonal inactivity leaves the whole network stagnant, not just the tanks.

What happens inside

How water moves through a yacht, and where it stops moving

Water pipes and valves
Water pipes and valves

On a yacht, fresh water travels from the tanks through a pump and a pressure accumulator, splits into a cold circuit and a hot circuit heated by the calorifier (the hot-water boiler), then runs through a distribution loop to the galley, crew mess, cabins and deck showers.

Wherever water slows down or stops, biofilm can form: a slimy layer of bacteria that sticks to the inside of pipes, hoses and shower heads. Typical spots are dead legs — pipe branches with no flow, often left after modifications — and outlets that are rarely used, such as spare guest cabins or crew heads.

Temperature matters too. Hot water that cools down along the line and cold water that warms up in hot technical spaces both sit in the range where bacteria grow more easily. Cleaning the tank alone does not reach any of these points.

01
TANK

Stored fresh water from shore supply or watermaker.

02
PUMP & ACCUMULATOR

Pressurises the system; water can rest in the accumulator.

03
CALORIFIER

Heats water; sediment can settle at the bottom.

04
DISTRIBUTION LOOP

Metres of pipe, branches and possible dead legs.

05
CABINS & SHOWERS

Taps, mixers, hoses and shower heads in daily use.

06
LITTLE-USED OUTLETS

Spare cabins and crew areas where water stagnates longest.

Shower head on board
Shower head on board
Warning signs

Signs that the distribution network needs sanitizing

These signs do not confirm contamination on their own. They show where the inspection should start.

Smell at specific outlets

A musty or sulphur smell at one shower or basin may indicate a local biofilm problem.

Slimy or stained shower heads

Dark deposits or slime inside shower heads and hoses can be associated with biofilm.

Temperature drift

Hot water that arrives lukewarm, or cold water that is not cold, at distant outlets.

Known dead legs

Capped or unused branches left after refit or equipment changes.

Seasonal inactivity

Lay-up, yard periods or weeks without guests on board.

An unsatisfactory lab result

A sampling report that recommends corrective action on the water system.

Linda Abenaim, Biologist at Ekonore / AirBioBiologist
The science behind it

Linda Abenaim, Biologist at Ekonore / AirBio

Fresh water on board travels through tanks, pumps, filters, a calorifier and metres of pipe. Contamination usually settles in the parts that are rarely used. Treating only the tank leaves the rest of the system free to recontaminate it.

Linda Abenaim · Biologist, Ekonore / AirBio

Tell us about any branch that was closed or bypassed during the season: stagnant sections are where problems usually start.

  • Tanksinspected, cleaned, disinfected
  • Distributionpumps, filters, pipes, calorifier
  • Outletsflushed and checked one by one
Linda Abenaim on LinkedIn
Onboard survey

Not sure what your systems actually need?

Tell us the yacht, what the crew has noticed and where she is now: a technician calls you back within 24 hours and plans the survey around your programme.

Technician fitting water pipes
Technical inspection

How we map the water system before treatment

We start from the yacht's water system as it really is, which is not always as drawn. With the chief engineer we walk the network from the tanks to the furthest outlets and mark the points that need particular attention.

The result is a treatment plan that lists which circuits, loops and outlets will be treated, in which order, and how the crew will manage water use during the job.

  • Tanks, pump, accumulator and calorifier, including drain points
  • Layout of hot and cold distribution loops and main branches
  • Dead legs, capped branches and modifications from past refits
  • Little-used outlets in guest cabins, crew areas and deck showers
  • Condition of shower heads, hoses, mixers and aerators
  • Hot and cold temperatures at representative outlets
  • Any previous water sampling results the crew can share
AirBio Marine method

How we sanitize the fresh-water network

Each system is different, so the sequence is adapted on board. These are the steps of a typical system sanitization.

Protection and planning

We protect floors and interiors, agree isolation points with the chief engineer and plan which areas will be without water and when.

Tanks and calorifier

Tanks are cleaned or checked as needed, and the calorifier is drained where accessible so sediment does not feed the lines.

Ozonated water through the network

Our AWM-20 or MWM-20 units produce high-concentration ozonated water, which is pushed through pipes and loops to break down biofilm.

Outlet-by-outlet flushing

Each tap and shower is opened in turn, including little-used outlets and branches, so the treated water reaches the end of every line.

Shower heads and fittings

Shower heads, hoses and aerators are removed, cleaned and sanitized, or replacement is recommended where they are too worn.

Residual measurements and report

We measure residuals with digital meters after treatment, flush the system back to normal use and deliver a technical report with photos. Ozone breaks down naturally into oxygen: the outlets stay out of use during treatment, and the water system goes back into service only after the residual readings confirm it is safe.

Francesco Colombo, CEO of AirBio Marine (Ekonore S.r.l.)
A word from our CEO

We treat a yacht's water as one system, from the filling point to the last shower. Sanitising one part and ignoring the rest is how problems come back.

Francesco Colombo

CEO · AirBio Marine, a division of AirBio (Ekonore S.r.l.)

Book a water-system survey
Water system sanitization unit on the aft deck of a superyacht
Real AirBio Marine job: ozonated-water unit connected on the aft deck
Illustrative example

Inside a shower hose before and after treatment

These images are illustrative, not photographs of a specific job. They show the kind of biofilm that can line a shower connection and how the same fitting looks after cleaning and sanitization.

BeforeShower fitting lined with biofilm and limescale before sanitization
Cut-away shower hose end with brownish biofilm and scale inside.
AfterThe same shower fitting clean inside after water system sanitization
Same shower fitting after cleaning and sanitization.

Illustrative visual showing the type of condition we find and the result we work towards. Photos of real AirBio Marine jobs are shown in the gallery below and in every client report.

Real AirBio Marine jobs

Water system sanitization on board

Real photos from AirBio Marine jobs: the ozonated-water unit on the aft deck, our technician connecting it on a protected deck, a residual reading on a deck jacuzzi after treatment and our kit on the quay.

References

Where this comes from

Nothing here is our own invention. These are the public references behind the way we survey, sample and treat a water system. We say plainly which one is law, which is guidance and which is a laboratory method, because they are not the same thing and they do not all apply to every vessel.

Guideline

WHO — Guide to Ship Sanitation, 3rd edition (2011)

The World Health Organization reference for water, air and food hygiene on board vessels. It is guidance, not law, and it is what most port health authorities work from.

Public health information

ECDC — Legionnaires’ disease: facts

The European Centre for Disease Prevention and Control on how the bacterium behaves and which man-made water systems it multiplies in.

Law

Directive (EU) 2020/2184 on the quality of water intended for human consumption

EU law setting quality standards for drinking water and introducing risk assessment of domestic distribution systems. It governs the water supplied ashore; whether and how it applies on a private vessel depends on flag and port state rules.

Technical standard

ISO 11731:2017 — Water quality: enumeration of Legionella

The laboratory method used to count Legionella in a water sample. Worth asking which method a laboratory used before comparing two reports.

What our clients say

Verified reviews on Trustpilot

Reviews of La BioDisinfestazione | Ekonore Italia, the group AirBio Marine belongs to.

Documentation

What you receive

Technical report

Circuits, loops and outlets treated, the method used and observations from the inspection.

System notes

Dead legs, low-use branches and weak points found in the network, with photos.

Readings

Residual measurements after treatment and temperatures recorded at representative outlets.

Laboratory certificates

Results from the accredited laboratory, when sampling is part of the job.

Recommendations

Flushing routines for little-used outlets, possible modifications and a maintenance plan.

One report for the yacht's technical history

Every job closes with a written report: what was inspected, what was found, what was treated, photos before and after, readings where taken and recommendations for the next check. Useful for the captain, the management company, the next survey and the next season.

Who we work with

Who this service is for

Chief engineer

Wants the full network treated, including the calorifier, loops and dead legs, with isolation points agreed in advance.

Chief stewardess

Deals with guest complaints about smell or cloudy water in cabins, and needs showers and basins back in service quickly and clean.

Yacht manager

Needs a documented system treatment that responds to a sampling result or to management-company water-safety procedures.

Charter company

Needs cabins that were empty for weeks to deliver fresh water from the first guest shower.

Your yacht moves.

Where we sanitize yacht water systems

We work in Italian Riviera and Tuscany marinas and yards, and in other Mediterranean ports on request.

Yacht fresh-water system sanitization is available in these ports. Open your port for local details:

Italy
Monaco
Spain
and beyond

Wherever you are in the Mediterranean, we can be there.

Onboard survey

Book the survey before your next movement

We work in the main Mediterranean marinas and refit yards, with documented results and lab analysis where required.

FAQ

Yacht pipe cleaning: questions

Why is cleaning the tank not always enough?

Water leaves the tank and passes through the pump, accumulator, calorifier and many metres of pipe before reaching a tap. Biofilm, a slimy bacterial layer, can form anywhere along this route, especially in dead legs and little-used outlets. If these parts are not treated, a clean tank can be refilled with water that picks up contamination on its way to the cabins.

What is a dead leg in a yacht water system?

A dead leg is a section of pipe where water does not flow, such as a branch to removed equipment or an outlet that is capped or never used. Water stagnates there and can warm up, which favours bacterial growth. During the inspection we look for dead legs with the chief engineer and may recommend removing them or flushing them regularly.

How does ozonated water sanitize the pipes?

Our AWM-20 and MWM-20 units produce high-concentration ozonated water, which is pushed through the tanks, pipes and showers. Ozone is a strong oxidiser that helps break down biofilm on internal surfaces. Each outlet is then flushed in turn, and residuals are measured with digital meters before the system goes back to normal use.

Do you treat guest cabins and crew areas separately?

We treat the whole network, but we pay particular attention to outlets with different usage. Guest cabins may stay empty for weeks, while crew heads are used heavily. Little-used outlets are flushed individually so the treated water reaches the end of every line, and their condition is noted in the report.

Does this service include Legionella testing?

Sanitization and testing are different jobs. System sanitization cleans and treats the network. Testing, with samples analysed by an accredited laboratory, measures the result. We can include sampling before and after treatment, or you can arrange it through our Legionella testing or water sampling services.

Can the work be done with the crew on board?

Yes, in most cases. The job is planned with the captain and chief engineer so that water is interrupted only in agreed areas and time windows. Interiors are protected with floor coverings and masking. The work can be carried out in marina, at the yard, during lay-up or between charters.

What is yacht pipe cleaning?

It is the cleaning and sanitizing of the fresh-water pipes that run from the tank to the taps and showers: the distribution loops, the calorifiers and each outlet. We flush outlet by outlet and measure the result.

Why clean the pipes if the tank is clean?

Water passes through pipes, loops and calorifiers on its way to the tap, and deposits and biofilm can form there. Cleaning the tank alone does not reach them.

How do you sanitize yacht pipes?

With high-concentration ozonated water, which we flush through the system outlet by outlet.

Is this the same as Legionella treatment?

Not exactly. Pipe cleaning is a sanitization of the water system. For Legionella, see Legionella remediation and Legionella testing.

How long does yacht water system sanitization take?

It depends on the size of the yacht and the type of work: from less than a day to a day or more. We confirm the timing after the onboard survey and plan it around the yacht's programme.

How often should yacht water system sanitization be done?

We recommend repeating it at least every six months.

Can the crew and guests stay on board during yacht water system sanitization?

Yes, they can stay on board. It is better to go back into the treated spaces once the treatment has finished. Water outlets are out of use while the system is treated and flushed.

How much does yacht water system sanitization cost?

We can give you a rough quote before the survey, based on the yacht and what the crew has noticed. The precise quote follows the onboard survey, once we have seen the yacht and the areas to treat.

Onboard survey request

Tell us about the yacht

Yacht length, marina, systems and what you have noticed on board. A technician reads the message and calls you back to plan the survey.

"*" indicates required fields

Name*

Prefer to talk?

+39 0584 433 198

Monday to Friday. For captains, engineers and managers.

Where we work

Italian Riviera and Tuscany marinas and yards — Viareggio, La Spezia, Portofino, Genoa, Sanremo, Livorno, Argentario — and other Mediterranean ports on request.

Documented work

Every job ends with a technical report and photos for the yacht's records.

Bow of a yacht at sea
Onboard survey

Not sure where the problem starts?
Let the technical team assess it onboard.

In marina, at the yard or during lay-up. We tell you what needs treating — and what doesn’t.

+39 0584 433 198
Discretion.
Expertise.
Peace of mind.