Pouring a water sample into a vial in the laboratory
Water safety

Legionella Testing for Yachts & Superyachts

We take water samples at the right points on board, send them to an accredited laboratory and explain the results to you.

For captains, yacht managers and charter companies who need to know the Legionella status of their water system. We assess the risk, plan where to sample, collect the water, send it to an accredited laboratory and explain the results in plain language.

Watch: how Legionella establishes itself in a water system, and why stagnant lukewarm water is the trigger.
Italy · Monaco · SpainAt-berth serviceTechnical reportsDiscreet & professionalA healthier
yacht experience

Yacht Legionella testing at a glance

Legionella testing tells you whether Legionella bacteria are present in the yacht's water system. We assess the risk, plan where to sample, collect the water, send it to an accredited laboratory and explain the results in plain language.

Who it is for
Captains, yacht managers and charter companies who need to know the Legionella status of the water system.
How it works
Risk assessment, a sampling plan, water collection, laboratory analysis, interpretation, and a corrective plan if required.
How long it takes
The work on board takes from less than a day to a day or more, depending on the yacht and the number of sampling points. The time for the laboratory results comes on top of this.
Cost
We can give you a rough quote before the survey. The precise quote follows the onboard survey, once we have seen the yacht and the areas to treat.
Where
On board, at berth, in Italy, Monaco and Spain. The work is done by AirBio Marine's own technicians.
What you receive
A sampling plan, a sampling record, laboratory certificates and a plain-language interpretation.
How to start
Tell us the yacht, what the crew has noticed and where she is now. A technician calls you back within 24 hours and plans an onboard survey around your programme.
Why test now?

When a Legionella test makes sense

Legionella are bacteria that live in water and can multiply in warm, stagnant parts of a system. They are a concern when contaminated water is breathed in as fine droplets, for example from a shower. These are the usual reasons to test.

Management company or charter requirements

Many management companies and charter contracts expect periodic, documented water checks on board.

Before the season or a charter

A test before guests arrive gives the captain a documented picture of the system at that moment.

After lay-up or refit

Long periods of stagnation, or works on pipes and tanks, can change the condition of the system.

After a sanitization treatment

Testing after treatment shows whether the work has had the expected effect on the sampled points.

Lukewarm hot water or warm cold water

Temperatures that drift into the middle range can favour Legionella growth and should be checked.

No recent test on record

If nobody can find the last laboratory report, testing gives the yacht a starting point.

What happens inside

Where Legionella can grow in a yacht's water system

Microorganisms under a microscope
Microorganisms under a microscope

Legionella live naturally in water at low levels. The risk increases where water stands still, stays lukewarm and where biofilm — a slimy layer of bacteria on the inside of pipes and fittings — gives them shelter and nutrients.

On a yacht, these conditions can appear in tanks after lay-up, in the calorifier (the hot-water boiler), in long hot-water lines that cool down, in shower heads and hoses, and in outlets that are rarely opened. The general principle is simple: hot water should be kept hot, and cold water should be kept cold.

A test does not change any of this. It measures what is in the water at the sampled points on the day of sampling. That is why a sampling plan matters: the points chosen decide how useful the result is.

01
TANK

Stored water, possibly stagnant after inactivity.

02
CALORIFIER

Hot-water boiler where sediment and lukewarm zones can form.

03
HOT & COLD LINES

Long runs where temperatures can drift.

04
SHOWERS

Where water is sprayed into fine droplets.

05
LOW-USE OUTLETS

Spare cabins and technical spaces with little flow.

06
RETURN

Hot-water return, where relevant, shows loop condition.

Watch

How Legionella grows inside a water system

Legionella is not a yacht-specific bacterium. It lives in water at low levels and multiplies where water stands still, stays lukewarm and where biofilm has had time to form on the inside of pipes and fittings.

The video explains the mechanism on a building water system. On board the same conditions occur in a smaller, more concentrated network: short runs, dead legs, long periods alongside and outlets that are rarely opened.

Shower running: one of the outlets sampled for Legionella
Shower running: one of the outlets sampled for Legionella
Important distinction

Testing and sanitization are two different jobs

Testing tells you what is in the water at the sampled points on a given day. It does not clean anything. Sanitization treats the system to reduce biofilm and bacteria. It does not, on its own, tell you the result.

A negative result is a snapshot of that day, not a guarantee for the weeks that follow. Conditions change with use, temperature and inactivity, so testing works best as part of a regular plan, together with good maintenance.

If a result is positive, the next step is not to treat only the tap where Legionella was found, but to look at the whole system. We explain this on our Legionella remediation page. For a broader set of potable-water parameters, see yacht water sampling.

Sampling areas

Where we usually take samples on board

The exact points are chosen in the sampling plan. These are the areas that are typically considered.

Fresh-water tanks

The starting point of the system, especially after lay-up or refilling.

Showers

Guest and crew showers, where water is released as fine spray.

Crew accommodation

Crew heads and showers, often in heavy daily use or on long runs.

Guest cabins

Including cabins that stay empty for long periods.

Galley

Taps used for food preparation and drinking water.

Technical spaces and hot-water return

Calorifier outlet, technical outlets and the hot-water return where relevant.

Linda Abenaim, Biologist at Ekonore / AirBioBiologist
The science behind it

Linda Abenaim, Biologist at Ekonore / AirBio

Legionella grows where water sits between 25 and 45 °C and barely moves: dead legs, guest showers nobody uses, the calorifier outlet. We sample those points first, because one clean result from the galley tap does not describe the whole yacht.

Linda Abenaim · Biologist, Ekonore / AirBio

Before our visit, note which cabins and showers have not been used for more than a week. Those outlets tell us the most about the system.

  • Sampling pointsfarthest and least-used outlets first
  • Temperaturehot and cold checked at every point
  • Laboratoryculture analysis, results in writing
Linda Abenaim on LinkedIn
Onboard survey

Not sure what your systems actually need?

Tell us the yacht, what the crew has noticed and where she is now: a technician calls you back within 24 hours and plans the survey around your programme.

Laboratory analysis with a test tube
Before sampling

What we look at before choosing sampling points

A useful test starts with understanding the system. Before sampling, we review the layout with the chief engineer and look at how each part of the network is actually used.

This short assessment decides how many samples are needed and where, so the laboratory results reflect the areas of real concern.

  • Layout of tanks, calorifier, hot and cold circuits and return
  • Outlets closest to and furthest from the calorifier
  • Cabins and crew areas that are little used or closed
  • General hot and cold water temperatures at representative outlets
  • Recent lay-up, refit, treatment or repair history
  • Previous laboratory reports and management-company requirements
AirBio Marine method

How a Legionella test is carried out

Testing follows a clear sequence, from understanding the system to deciding what to do with the results.

Risk assessment

We review the water system, its use and its history to identify the areas where Legionella could be more likely to grow.

Sampling plan

We agree with you or the management company which points to sample, how many samples to take and which analyses to request.

Water collection

Trained technicians collect samples in sterile containers following the plan, labelling each one and recording the sampling conditions.

Laboratory analysis

Samples are delivered to an accredited laboratory with chain-of-custody records, and analysed for Legionella.

Interpretation

We read the laboratory certificates with you and explain in plain language what the results mean for each sampled point.

Corrective plan if required

If results call for action, we propose a corrective plan covering the whole system, not only the outlet where Legionella was detected.

Francesco Colombo, CEO of AirBio Marine (Ekonore S.r.l.)
A word from our CEO

Water looks the same until it is tested. We survey the system first, then clean, then sample again, so the result is a document and not a promise.

Francesco Colombo

CEO · AirBio Marine, a division of AirBio (Ekonore S.r.l.)

Book a water-system survey
Water system sanitization unit on the aft deck of a superyacht
Real AirBio Marine job: ozonated-water unit connected on the aft deck
Illustrative example

What we may find at a sampling point

These images are illustrative, not photographs of a specific job. Inspecting outlets before sampling can reveal scale and biofilm in shower heads, which are among the places a sampling plan considers. The after image shows the same outlet once cleaned as part of a corrective plan.

BeforeShower head with limescale and deposits in the nozzles before testing and cleaning
Shower head with limescale and dark deposits in the nozzles.
AfterThe same shower head with clear nozzles after cleaning and sampling
Same shower head after cleaning, nozzles clear.

Illustrative visual showing the type of condition we find and the result we work towards. Photos of real AirBio Marine jobs are shown in the gallery below and in every client report.

Real AirBio Marine jobs

Sampling and water work on board

Sampling documentation and real photos from AirBio Marine water jobs: our technician at work on a protected aft deck and a residual reading on a deck jacuzzi after treatment.

References

Where this comes from

Nothing here is our own invention. These are the public references behind the way we survey, sample and treat a water system. We say plainly which one is law, which is guidance and which is a laboratory method, because they are not the same thing and they do not all apply to every vessel.

Guideline

WHO — Guide to Ship Sanitation, 3rd edition (2011)

The World Health Organization reference for water, air and food hygiene on board vessels. It is guidance, not law, and it is what most port health authorities work from.

Public health information

ECDC — Legionnaires’ disease: facts

The European Centre for Disease Prevention and Control on how the bacterium behaves and which man-made water systems it multiplies in.

Law

Directive (EU) 2020/2184 on the quality of water intended for human consumption

EU law setting quality standards for drinking water and introducing risk assessment of domestic distribution systems. It governs the water supplied ashore; whether and how it applies on a private vessel depends on flag and port state rules.

Technical standard

ISO 11731:2017 — Water quality: enumeration of Legionella

The laboratory method used to count Legionella in a water sample. Worth asking which method a laboratory used before comparing two reports.

What our clients say

Verified reviews on Trustpilot

Reviews of La BioDisinfestazione | Ekonore Italia, the group AirBio Marine belongs to.

Documentation

What you receive

Sampling plan

The points sampled, why they were chosen and the analyses requested.

Sampling record

Date, time, outlet, conditions at sampling and chain-of-custody details.

Laboratory certificates

Official results issued by the accredited laboratory for each sample.

Plain-language interpretation

A clear explanation of what the results mean for your yacht.

Next steps

Recommendations on retesting frequency, maintenance and, if needed, a corrective plan.

One report for the yacht's technical history

Every job closes with a written report: what was inspected, what was found, what was treated, photos before and after, readings where taken and recommendations for the next check. Useful for the captain, the management company, the next survey and the next season.

Who we work with

Who this service is for

Captain

Needs documented Legionella results before the season or a charter, and a clear explanation to share with the owner.

Yacht manager

Needs periodic testing with a consistent sampling plan across yachts, and certificates that fit the management company's records.

Charter company

Wants evidence that water checks were carried out before guests board, and advice if anything needs attention.

Chief engineer

Wants sampling points chosen on the real layout of the system, and results that help decide where maintenance is needed.

Your yacht moves.

Where we carry out Legionella testing

We sample on board in Italian Riviera and Tuscany marinas and yards, and in other Mediterranean ports on request.

GenovaPortofinoLa SpeziaViareggioLivornoSanremoMonacoAntibesPorto CervoOlbia
Italy
Monaco
Spain
and beyond

Wherever you are in the Mediterranean, we can be there.

Onboard survey

Book the survey before your next movement

We work in the main Mediterranean marinas and refit yards, with documented results and lab analysis where required.

Yacht Legionella testing in 30 Mediterranean ports

We work across the Italian Riviera, Tuscany, Sardinia, the French Riviera, Monaco, Spain and the Balearics. Open your port for local details.

FAQ

Legionella testing: frequently asked questions

Is Legionella testing the same as sanitizing the water system?

No. Testing measures what is in the water at the sampled points on the day of sampling. Sanitization treats the system to reduce biofilm and bacteria. A test does not clean anything, and a treatment does not, by itself, show its result. The two are often combined: testing to understand the situation, treatment where needed, and retesting to verify.

Does a negative result mean my yacht is free of Legionella?

A negative result means Legionella was not detected in the samples taken, at those points, on that day. It is a snapshot, not a guarantee. Conditions change with use, temperature and periods of inactivity, which is why testing works best as part of a regular plan together with good maintenance of the water system.

Where do you take samples on a yacht?

Typical areas are the fresh-water tanks, guest and crew showers, crew accommodation, guest cabins, the galley, technical spaces and the hot-water return where relevant. The exact points are chosen in a sampling plan agreed with you or the management company, based on the layout of the system and how each area is used.

Who analyses the samples?

Samples are collected by trained technicians in sterile containers, labelled, recorded with chain-of-custody documentation and delivered to an accredited laboratory for analysis. The laboratory issues official certificates, which we include in the documentation and explain to you in plain language.

What happens if Legionella is found?

We read the results with you and, if action is required, propose a corrective plan. This looks at the whole water system, not only the tap where Legionella was detected, because the cause may be elsewhere in the network. The plan usually includes inspection, treatment, flushing and verification testing afterwards.

How often should a yacht be tested for Legionella?

There is no single answer for every yacht. Frequency depends on management-company and charter requirements, how the yacht is used, lay-up periods and previous results. Common moments are before the season, after refit or lay-up and after any treatment. We can suggest a testing schedule as part of a maintenance plan.

How long does Legionella testing take?

The work on board takes from less than a day to a day or more, depending on the yacht and the number of sampling points. The time for the laboratory results comes on top of this.

How much does Legionella testing cost?

We can give you a rough quote before the survey, based on the yacht and what the crew has noticed. The precise quote follows the onboard survey, once we have seen the yacht and the areas to treat.

Onboard survey request

Tell us about the yacht

Yacht length, marina, systems and what you have noticed on board. A technician reads the message and calls you back to plan the survey.

"*" indicates required fields

Name*

Prefer to talk?

+39 0584 433 198

Monday to Friday. For captains, engineers and managers.

Where we work

Italian Riviera and Tuscany marinas and yards — Viareggio, La Spezia, Portofino, Genoa, Sanremo, Livorno, Argentario — and other Mediterranean ports on request.

Documented work

Every job ends with a technical report and photos for the yacht's records.

Aerial view of boats docked in a marina
Onboard survey

Not sure where the problem starts?
Let the technical team assess it onboard.

In marina, at the yard or during lay-up. We tell you what needs treating — and what doesn’t.

+39 0584 433 198
Discretion.
Expertise.
Peace of mind.